 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Hi-Reliability GaAIAs Infrared Emitting Diode OP223, OP224 (TX, TXV) OP224 (S) Features: * Processed to OPTEK's military screening program, patterned * * * * after MIL-PRF-19500 Miniature hermetically sealed "pill" package Twice the power output of GaAs at same drive current "S" level screening available Mechanically and spectrally matched to OP600 phototransistors Description: Each OP223 (TX, TXV) and OP224 (S, TX, TXV) device is an 890 nm high reliability gallium aluminum arsenide infrared emitting diode that is mounted in a miniature hermetically sealed "pill" type package which can be directly mounted to PCBoards. The gallium aluminum arsenide feature provides twice the radiated output of gallium arsenide at the same forward current. After electrical testing by manufacturing, devices are processed to OPTEK's 100 percent screening program, which is patterned after MIL-PRF-19500. With a wavelength centered at 890 nm, the OP223 (TX, TXV) and OP224 (S, TX, TXV). TX and TXV devices are processed to OPTEK's military screening program patterned after MIL-PRF-19500. S devices are processed to OPTEK's military screening program patterned after MIL-STD-883. Please refer to Application Bulletins 208 and 210 for additional design information and reliability (degradation) data. Contact your local representative or OPTEK for more information. Applications: * * * * * * Non-contact reflective object sensor Assembly line automation Machine automation Machine safety End of travel sensor Door sensor 1 Part Number OP223TX OP223TXV OP224S OP224TX OP224TXV LED Peak Output Power/ Wavelength Minute 1.00 mW/cm2 890 nm 1.50 mW/cm2 Total Beam Angle Lead Length 24 N/A 2 Pin # 1 2 LED Anode Cathode Sensor Collector Emitter DIMENSIONS ARE IN: [MILLIMETERS] INCHES OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.2 07/06 Page 1 of 3 Hi-Reliability GaAIAs Infrared Emitting Diode OP223, OP224 (TX, TXV) OP224 (S) Absolute Maximum Ratings (TA = 25 C unless otherwise noted) Storage Temperature Range Operating Temperature Range Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 seconds with soldering iron](1) Reverse Voltage Continuous Forward Current Power Dissipation (2) -65o C to +150o C -55o C to +125o C 260 C 2.0 V 100 mA 100 mW Notes: 1. No clean or low solids. RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering. 2. Derate linearly 1.00 mW/ C above 25 C. Electrical Characteristics (TA = 25 C unless otherwise noted) SYMBOL Input Diode EE (APT) VF IR P B P /T HP Radiant Power Output OP223 (TX, TXV) OP224 (S, TX, TXV) Forward Voltage Reverse Current Wavelength at Peak Emission Spectral Bandwidth between Half Power Points Spectral Shift with Temperature Emission Angle at Half Power Points 1.00 1.50 0.80 890 80 0.18 18 1.80 100 mW PARAMETER MIN TYP MAX UNITS TEST CONDITIONS IF = 50 mA IF = 50 mA IF = 50 mA VR= 2.0 V IF = 50 mA IF = 50 mA IF = Constant V A nm nm nm/C Degree IF = 50 mA OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.2 07/06 Page 2 of 3 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Hi-Reliability GaAIAs Infrared Emitting Diode OP223, OP224 (TX, TXV) OP224 (S) OP223 (TX, TXV), OP224 (S, TX, TXV) Forward Voltage vs Forward Current vs Temperature 1.8 1.7 1.6 3.5 Optical Power vs IF vs Temperature Normalized at 50 mA and 20 C 3.0 Typical Forward Voltage (V) 1.5 1.4 1.3 1.2 1.1 1.0 0.9 0 10 20 30 40 50 60 70 80 90 100 Forward Current (mA) -60 C -40 C -20 C 0 C 20 C 40 C 60 C 80 C 100 C 120C Normalized Optical Power 2.5 2.0 -60 C -40 C -20 C 0 C 20 C 40 C 60 C 80 C 100 C 120 C 1.5 1.0 0.5 0.0 0 10 20 30 40 50 60 70 80 90 100 Forward Current IF (mA) 6 Distance vs Output Power vs Forward Current Normalized at 1" and 50 mA 1.0 0.9 Forward Voltage vs Relative Radiant Intensity vs Angular Displacement 5 Forward Current 10 mA 20 mA 30 mA 40 mA 50 mA 60 mA 70 mA 80 mA 90 mA 100 mA 0.8 Relative Radiant Intensity 0.7 0.6 0.5 0.4 0.3 0.2 0.1 Normalized Output Power 4 3 2 1 0 0.2 '' 0.4 '' 0.6 '' 0.8 '' 1.0 '' 1.2 '' 1.4 '' 1.6 '' 1.8 '' 2.0 '' 0.0 -20 -15 -10 -5 0 5 10 15 20 Distance (inches) Angular Displacement (Degrees) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.2 07/06 Page 3 of 3 |
Price & Availability of OP22306
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |